Anker SOLIX E10 Power Module

£1,068.99 inc. VAT

FREE UK delivery

US-specification product: Voltage, frequency and sockets may differ from UK 230 V / 50 Hz mains and BS 1363 outlets. Check the stated ratings before purchase; a plug adaptor does not convert voltage or frequency. Fixed wiring requires a qualified electrician. US certifications and warranty terms do not confirm UK conformity or UK warranty cover.

The heart of the Anker SOLIX E10 whole-home backup system: up to 7.6kW continuous (10kW with two or more batteries), up to 37.2kW surge, solar input and backup in 20 ms or less.

FREE 30-day returnsDispatched in 1-2 working daysVAT includedQuestions? Email our UK team
SKU: A17E1141 Category:

What can it power?

Build a typical setup. These estimates assume 85% usable battery capacity and simultaneous use.

0estimated hours

Select an appliance to begin.

Estimates only. Actual runtime varies with appliance cycling, inverter losses, temperature and battery condition. Check high-startup appliances with our team.

Description

Overview

The E10 power module runs your home from its B6000 battery modules, solar panels and an optional Anker Smart Generator. It delivers up to 7.6kW continuous with one battery module, or 10kW sustained for up to 90 minutes with two or more, and surges up to 37.2kW (155 LRA) to start heavy loads.

When the grid fails, backup switches on in 20 ms or less. Two PV inputs take up to 4,500W each (30 to 450V). It’s rated NEMA 4 (IP66) for outdoor installation, with a heating film for cold-weather charging.

The E10 is Anker SOLIX’s whole-home backup system. One E10 power module takes up to five B6000 battery modules, and up to three E10 units can connect through a Power Dock for a system of up to 90kWh.

Who it’s for

  • Homeowners who want whole-home backup.
  • Homes adding solar and a backup generator to one system.
  • Outdoor or garage installations.

Key benefits

  • Whole-home power: up to 10kW continuous with two or more battery modules.
  • Starts heavy loads: up to 37.2kW surge (155 LRA).
  • Fast backup: switches over in 20 ms or less.
  • Solar ready: two PV inputs, up to 4,500W each.
  • Outdoor-rated: NEMA 4 (IP66), -20°C to 55°C, maintenance-free.

Specifications

Continuous output 7.6kW (1 battery module); 10kW for up to 90 min (2+ modules)
Surge Up to 37.2kW (155 LRA)
Backup switchover 20 ms or less
PV inputs 2, up to 4,500W each, 30 to 450V
Battery modules Up to 5 B6000 (about 30kWh)
Chemistry LFP; 80% capacity after 4,000 cycles
Enclosure NEMA 4 (IP66)
Operating temperature -20°C to 55°C
Mounting Wall or floor
Weight 60.6 lb (manufacturer figure)

FAQ

Do I need battery modules too?

Yes. The E10 power module works with B6000 battery modules, sold separately.

Does it need an electrician?

Whole-home installation, including the Power Dock, requires a qualified electrician.

Can it go outside?

Yes. It’s rated NEMA 4 (IP66). Anker recommends wall mounting in flood-prone areas.

Warranty

Manufacturer’s warranty: 5 years.

Our returns policy is in addition to your statutory rights.
Defective on arrival or within 30 days? You can also return it to us under our Returns & Refunds Policy. See how warranty claims work.

Additional information

Weight 27.4877 kg
Brand

Anker

Reviews

There are no reviews yet.

Be the first to review “Anker SOLIX E10 Power Module”

Your email address will not be published. Required fields are marked *